nav emailalert searchbtn searchbox tablepage yinyongbenwen piczone journalimg journalInfo journalinfonormal searchdiv searchzone qikanlogo popupnotification paper paperNew
2023, 07, v.23;No.139 2523-2533
Analysis of carbon emissions and carbon reduction rffect of 3D printing buildings based on LCA method
Email:
DOI: 10.13637/j.issn.1009-6094.2022.0650
Published:   2022-06-21
Publication Date:   2022-06-21
Online:   2022-06-21
Mobile reading
Abstract:

Aiming at the evaluation of carbon emission and carbon reduction effect of 3D printed buildings, the life cycle evaluation method is adopted to define the calculation boundary and calculation model of carbon emission of 3D printing buildings. The carbon emission of 3D-printed buildings in the materialization stage is compared with that of traditional buildings and general green buildings. The quantitative analysis shows the following results: First, in the materialization stages of 3D printing construction and traditional construction, and general green construction, the carbon emissions of building materials account for about 90% of the total carbon emissions. Among the carbon emissions of building materials, the carbon emissions of concrete are dominant, accounting for about 70%-80%. 3D printing of special concrete can effectively reduce the carbon emission per cubic meter of concrete by 10%-30% by adding fly ash, silica fume, and other materials instead of some cement, which has a good carbon reduction effect. Secondly, the total amount of carbon emissions generated during the material transportation and construction of the 3D printing construction mode is reduced by 28.02% and 27.84% respectively compared with the traditional construction mode and the general green construction mode. Finally, in the building materialization stage, the total carbon emissions of 3D printing construction are reduced by 15.97% and 8.78% compared with those of traditional construction and general green construction, respectively, which indicates that 3D printing construction can not only reduce the carbon of traditional construction but also reduce the carbon of general green construction using low-carbon concrete. It is concluded that the way of carbon reduction in the construction industry should focus on new building materials and new construction technologies, while the characteristics of low-carbon concrete, “template-free” construction, and high mechanization of building 3D printing technology meet this requirement, and the carbon reduction effect is remarkable, which is conducive to promoting the carbon reduction action in the construction industry.

References

[1] Intergovernmental Panel on Climate Change.Climate change 2021:the physical csience basis[R].Cambridge and New York:Cambridge University Press,2021.

[2] 汪涛.建筑生命周期温室气体减排政策分析方法及应用[D].北京:清华大学,2012.WANG T.Analysis method and application of greenhouse gas emission reduction policy in building life cycle [D].Beijing:Tsinghua University,2012.

[3] 张天辰.基于全生命周期的低碳桥梁评价体系研究[D].徐州:中国矿业大学,2018.ZHANG T C.Research on evaluation system of low-carbon bridges based on life cycle [D].Xuzhou:China University of Mining and Technology,2018.

[4] 葛杰,马荣全,苗冬梅,等.3D打印建筑材料层间粘结性能试验研究[J].建筑结构,2017,47(4):49-52.Ge J,MA R Q,MIAO D M,et al.Experimental study on interlayer bonding performance of 3D printed building materials [J].Building Structure,2017,47(4):49-52.

[5] 申立银,陈进道,严行,等.建筑生命周期物化碳计算方法比较分析[J].建筑科学,2015,31(4):89-95.SHEN L Y,CHEN J D,YAN X,et al.Comparative analysis of physical and chemical carbon calculation methods in building life cycle [J].Building Science,2015,31(4):89-95.

[6] SUZUKI M,OKA T,Estimation of life cycle energy consumption and CO2 emission of office buildings in Japan [J].Energy and Buildings,1998,28(1):33-41.

[7] YOU F,HU D,ZHANG H,et al.Carbon emissions in the life cycle of urban building system in China—a case study of residential buildings[J].Ecological Complexity,2011,8(2):201-212.

[8] 陈冲.基于LCA的建筑碳排放控制与预测研究[D].武汉:华中科技大学,2013.CHEN C.Research on building carbon emission control and prediction based on LCA [D].Wuhan:Huazhong University of Science and Technology,2013.

[9] 仲平.建筑生命周期能源消耗及其环境影响研究[D].成都:四川大学,2005.ZHONG P.Research on energy consumption and environmental impact of building life cycle [D].Chengdu:Sichuan University,2005.

[10] 李小冬,朱辰.我国建筑碳排放核算及影响因素研究综述[J].安全与环境学报,2020,20(1):317-327.LI X D,ZHU C.Review of China’s building carbon emission accounting and influencing factors [J].Journal of Safety and Environment,2020,20(1):317-327.

[11] KHAN S A,KOC M,AL-GHAMDI S G.Sustainability assessment,potentials and challenges of 3D printed concrete structures:a systematic review for built environmental applications [J].Journal of Cleaner Production,2021,303:127027.

[12] KAZEMIAN A,KHOSHNEVIS B.Real-time extrusion quality monitoring techniques for construction 3D printing [J].Constr Build Mater,2021,303:124520.

[13] CESARETTI G,DINI E,KESTELIER X D,et al.Building components for an outpost on the Lunar soil by means of a novel 3D printing technology [J].Acta Astronaut,2014,93:430-450.

[14] WANG L,MA G W,LIU T H,et al.Interlayer reinforcement of 3D printed concrete by the in-process deposition of U-nails [J].Cement Concrete Res,2021,148:106535.

[15] 肖建庄,柏美岩,唐宇翔,等.中国3D打印混凝土技术应用历程与趋势[J].建筑科学与工程学报,2021,38(05):1-14.XIAO J Z,BAI M Y,TANG Y X,et al.Application history and trend of 3D printed concrete technology in China [J].Journal of Architecture and Civil Engineering,2021,38(5):1-14.

[16] 朱彬荣,潘金龙,周震鑫,等.3D打印技术应用于大尺度建筑的研究进展[J].材料导报,2018,32(23):4150-4159.ZHU B R,PAN J L,ZHOU Z X,et al.Research progress of 3D printing technology applied to large-scale buildings [J].Materials Reports,2018,32(23):4150-4159.

[17] ALHUMAYANI H,GOMAA M,SOEBARTO V,et al.Environmental assessment of large-scale 3D printing in construction:a comparative study between cob and concrete [J].Journal of Cleaner Production,2020,270:122463.

[18] 建筑碳排放计算标准:GB/T 51366—2019[S].北京:中国建筑工业出版社,2019.Calculation standard of building carbon emission:GB/T 51366—2019[S].Beijing:China Building Industry Press,2019.

[19] 袁荣丽.基于BIM的建筑物化碳足迹计算模型研究[D].西安:西安理工大学,2019.YUAN R L.Research on BIM-based carbon footprint calculation model of buildings [D].Xi’an:Xi’an University of Technology,2019.

[20] 李静,包昀培.建筑物物化阶段碳足迹快速计算模型研究[J].建筑经济,2016,37(8):87-91.LI J,BAO Y P.Research on the fast calculation model of carbon footprint in the physicochemical stage of buildings [J].Construction Economy,2016,37(8):87-91.

[21] 贾铖修.基于生命周期评价的3D打印建筑结构碳排放量化分析[D].杭州:浙江大学,2021.JIA C X.Analysis of carbon emission of 3D printed building structure based on life cycle assessment [D].Hangzhou:Zhejiang University,2021.

[22] 陈艾荣,常成,马如进,等.结构拓扑优化理论及其在桥梁结构找型中的应用[J].同济大学学报(自然科学版),2016,44(5):657-663.CHEN A R,CHANG C,MA R J,et al.Structural topology optimization theory and its application in bridge structure form finding [J].Journal of Tongji University(Natural Science),2016,44(5):657-663.

[23] AMRAN M,ABDELGADER H S,ONAIZI A M,et al.3D-printable alkali-activated concretes for building applications:a critical review [J].Constr Build Mater,2022,319:126126.

Basic Information:

DOI:10.13637/j.issn.1009-6094.2022.0650

China Classification Code:TU741;X799.1

Citation Information:

[1]MENG Qingcheng,HU Lei,LI Mingjian ,et al.Analysis of carbon emissions and carbon reduction rffect of 3D printing buildings based on LCA method[J].Journal of Safety and Environment,2023,23(07):2523-2533.DOI:10.13637/j.issn.1009-6094.2022.0650.

Fund Information:

国家自然科学基金项目(52078442,51408498);; 四川省科技计划项目(2021YJ0038)

Published:  

2022-06-21

Publication Date:  

2022-06-21

Online:  

2022-06-21

Search Advanced Search